Can drip irrigation hoses be buried? | (2023)

As an Amazon Associate, we earn from qualifying purchases made on our site. If you make a purchase through links from this site, we may receive a small percentage of sales from Amazon and other similar affiliate programs.

Drip irrigation hoses ensure that all plants in the field receive the same amount of water with the least possible evaporation. You must have noticed that most farms have these hoses on the ground and not buried. This article is all about irrigation hoses and whether or not they can be buried.

It is possible to bury the irrigation pipes underground, but it is not recommended. The irrigation pipe will be compressed by the weight of the soil, cutting off the flow of water or even damaging the system. Also, soil can clog the system and drastically reduce its lifespan.

If you are looking for information about drip irrigation, be sure to read the article to the end.

How long can a drip irrigation line be?

The length of the irrigation hose depends on its width and the water pressure. The length and width of the irrigation hose must be in the right proportion to achieve the best results. The wrong ratio of length and width breaks the laws of physics and the expected performance is reduced.

(Video) Irrigation | Buried Or Surface Irrigation Piping. Which Is Right For Your Garden?

Remember that pressure matters, as does length and diameter. However, if there is too much pressure, the fittings will simply burst out of the line.

Can drip irrigation hoses be buried? | (1)

Standard width of drip irrigation pipe

  • The standard width of an irrigation hose is ½ inch. But nowadays the market is thriving with itmany varieties(Check them out on Amazon here). Based on this, the length changes dramatically.
  • In addition to the standard ½ inch tube, many people are considering using a ¼ inch tube, commonly known as spaghetti hose. But maintenance is an issue, so consider the larger standard size.

Standard length of a pipe

  • If you use a standard ½ inch wide pipe for drip irrigation purposes, the length can be up to 2000 feet. This size can handle a maximum flow of 240 GPH or 4 GPM.
  • A 1/4 inch wide drip irrigation pipe must be no longer than 19 feet. This size can handle a maximum flow of 30 GPH or 0.5 GPM.

So you can now choose the best size and length according to your wishes. You must never install large capacity hoses that may remain underutilized as this will affect the water pressure of the hose.

What is the best drip irrigation hose?

If you're looking to set up drip irrigation, most likely on your farm or a vineyard, you'll need to think about the best hoses. There is a wide range of products on the market and it is natural to wonder which is the best. If you are worried about the quality, follow this section.

Some of the best drip irrigation hoses are made from polyethylene.This material is considered the backbone of a drip irrigation system. Polyethylene hoses are durable, which ensures the long life of the irrigation system in the field.

Earlier the width of the tube was mentioned. Based on that, here is a small list of some of the best hoses for a drip irrigation system.

(Video) Top 6 Reasons for Burying Drip Tape

● ¼-inch soaker drip line

This tube is widely used in garden beds, planters, etc. You get any 6.9 or maybe 12 inch emitter pre-installed in the tube depending on what the shop owner has in stock. Thanks to its flexibility, you can fold it as you like.You can get USA made drip lines on Amazon, check them out here.

● ½ inch emitter tube

Under the ½ inch category, this hose is perfect for long rows on both hilly and flat terrain. The most common applications include orchards, vineyards, etc. Again, radiators are installed every 9, 12, 18 or 24 inches.

● Oval hose

As the name suggests, you can wind up this tube neatly. If you are looking for low pressure irrigation, the oval hose is best.

● IPS hose

This tube is the strongest of them all. Such pipes are often used in vineyards where the underground water tank needs to be connected to the rows of grapes. Unfortunately, this hose is not suitable for continuous pressure.

If you want to know how to make a cheap drip irrigation system (under $200), read this articleHere.

How do you make a hole in a drip irrigation hose?

Although the irrigation hoses usually come with emitters pre-installed, you could end up installing some yourself. In this case you need to drill a hole in the tube. That's easier said than done. So in this section you will learn all about drilling holes in the tube.

(Video) Soaker Hoses vs. Drip Irrigation

Holes in the drip irrigation pipes can be made with the help of a sharp and hot needle. The piercing of the needle in the tube creates holes. However, it is important that all holes are the same size; Otherwise the radiators will not fit perfectly in the line.

Just making holes this way won't work. After you are done with the piercing part, the next step is to install the barbed drip emitters in it. They are small plastic devices.

The emitter controls how much water comes out of each hole. Of course, you don't want some parts of your field to be muddy while others stay dry. Simply snap the barbs into the punched holes.

Of course there are other components that one could add to the hose such as splitters or adapters to separate a ¼ inch line from the main line. Take a look at your options and put together the most efficient system for your gardens.

Which is better: soak hose or drip irrigation?

Can drip irrigation hoses be buried? | (2)

Besides drip irrigation, a drip hose is another famous garden watering technique.

(Video) Drip Tape vs. Soaker Hose - Which is Better?

Both drip hose and drip irrigation are great watering techniques. Depending on the application and requirements, one of the two methods is implemented. So what are these factors that can influence where we apply them? Let's take a look.

Why is a drip hose better?

  • A soak hose is best when you want to set up an irrigation system in a small space. Consider your garden. In terms of size, it cannot be compared to a farm. So use a drip hose on small spots to get the best results.
  • It's a cheaper method than the other. Why waste money when there is a cheaper way out?

Check out this drip installation video from YouTube:

Why is drip irrigation better?

  • While a drip irrigation system can cost a fortune, it's worth every penny.
  • Drip irrigation is not good for small areas. If you want to cover a large plot, e.g. B. farms, vineyards, etc., this is the only recommended method.

Why is drip irrigation good?

Drip irrigation is considered to be one of the best methods when growing crops and plants on a large scale. But then the question arises here, why is this method suitable? So this section is about unraveling the mystery behind this form of irrigation.

The drip irrigation system aims to direct the water directly to the roots of the plants. This process severely limits the evaporation process. As a result, less water is required due to less evaporation.

Here is the summary of the key points why drip irrigation is good:

  • Low evaporation rate: Since the water has a short path to the plant roots, less water evaporates.
  • Drip irrigation works with low pressure. You don't need a lot of electrical energy to power these water pumps.
  • A drip irrigation system does not require too many human resources. If you're irrigating large fields, one option is to hire people to irrigate the fields. That would be very expensive. So, a drip irrigation system can help you save a lot of money.
  • It will help you to sprinkle the water evenly all over the field.
  • You can add emitters and sprinklers in the drip irrigation hose to direct the water in ways sprinkler systems just can't achieve.


Drip irrigation is one of the most popular irrigation systems around the world. The endless benefits make this method nothing less than revolutionary in the field of irrigation. If you are looking for comprehensive limescale coverage, drip irrigation is a perfect choice.

(Video) Watering Systems: Drip Irrigation, Buried Clay Pots, Garden Hose Tips | Farm your Yard

The easy setup feature further increases its popularity. So if you want to irrigate your garden, a vineyard or a farm, always remember that a drip irrigation system can help you achieve your watering goals. Until now, no other system has been able to beat the drip irrigation system, so its supremacy still holds!

Are you a landscape enthusiast and want to help me build I am looking for authors! Just email me at[Email Protected]


1. Subsurface Irrigation
(Southern Nevada Water Authority)
2. Should I bury my drip system?
(Holmes Lawn & Pest)
3. How to Connect Drip Irrigation to a Hose Bibb, Faucet or Spigot - and automate it!
(Homestead and Chill)
4. FAIL: Fixing Buried Drip Irrigation Tape
(J&J Acres)
5. How To Water Your Garden With Soaker & Emitter Hoses | Beginner’s Guide For Garden Watering
(From Dream to Seed)
6. Drill Holes in 1/2" PVC Pipe and This Happens
(Daisy Creek Farms with Jag Singh)
Top Articles
Latest Posts
Article information

Author: Amb. Frankie Simonis

Last Updated: 04/22/2023

Views: 5555

Rating: 4.6 / 5 (76 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Amb. Frankie Simonis

Birthday: 1998-02-19

Address: 64841 Delmar Isle, North Wiley, OR 74073

Phone: +17844167847676

Job: Forward IT Agent

Hobby: LARPing, Kitesurfing, Sewing, Digital arts, Sand art, Gardening, Dance

Introduction: My name is Amb. Frankie Simonis, I am a hilarious, enchanting, energetic, cooperative, innocent, cute, joyous person who loves writing and wants to share my knowledge and understanding with you.